This is the daily load level implied by your current profile.
Use the Stage 0 site profile to estimate the system size, cost range, annual savings, and payback period before generating the report.
Start here
Add location plus either the monthly bill or monthly kWh usage. Roof direction and shade help shape the estimate.
Stage 0
Capture your site and usage profile
These inputs drive the basic estimate and are carried into the final report narrative.
Enter either the monthly bill or monthly kWh usage. If you provide both, the estimate uses the explicit kWh input and keeps the bill for savings context.
Required to continue: address or area, plus either monthly bill or monthly kWh usage.
Once Stage 0 is complete, the live estimate updates continuously and the same profile is carried into the final PDF report.
Add your address or area, then enter either monthly bill or monthly kWh usage to continue.
Stage 1
Where should we send the report?
Your verified report stays attached to the right contact and can be accessed later from the account.
We will use this email for the one-time verification code before the report is created.
Stage 2
Secure verification
We send a 6-digit OTP to the email address above before the report is created.
We’ll redirect you to verify the code, then bring you back here to preview and generate the report.
Estimate Summary
What this estimate suggests for your property
We are translating your site profile into a practical solar planning summary.
Based on your submitted inputs
Your current estimate is being prepared.
Once ready, this section will explain the likely system direction, battery expectation, and whether the setup is better suited for backup, daytime savings, or both.
We translate your Stage 0 inputs into an initial system direction.
Battery sizing reflects the backup window in the estimate.
We summarise whether the current direction leans more toward backup, savings, or both.
Site Fit And Confidence
How strong is this estimate for your site?
This is still a guided estimate, but we can show what is already supported by your inputs and what still needs a technical survey.
Credibility check
Guided estimate
We are checking the location, roof direction, shade level, and usage assumptions behind this estimate.
Your area helps anchor the estimate and site follow-up.
Roof-space fit becomes clearer once usable area is known.
Direction and shade shape production confidence.
A site survey still confirms panel layout, cable runs, and protections.
Assumptions used in this estimate
Confidence --
- Assumptions will appear here as soon as the preview is ready.
Scenario Comparison
Compare likely system directions
Use these indicative options to compare budget, backup coverage, and bill-reduction tradeoffs before you talk to an installer.
Scenario comparisons appear once Stage 0 has enough information.
These are planning scenarios, not final engineering designs. A technical survey still confirms the buildable option.
Financial Snapshot
What the current estimate means financially
These numbers stay indicative until the final report and site survey, but they help you judge budget direction early.
Generation appears once the estimate has panel direction and solar yield assumptions.
This estimates how much of the current monthly usage the system could cover.
Savings depend on actual usage, tariff, and how closely the final system matches the estimate.
This simple view excludes financing, tariff shifts, maintenance, and battery replacement timing.
What The Full Report Includes
What you get when you unlock the report
The paid report is designed to help you compare vendors, plan next steps, and understand the assumptions behind the recommendation.
Personalized solar system sizing
A recommendation shaped by your site, usage, roof direction, shading, and backup expectations.
Panel capacity guidance
Indicative array sizing so you can discuss the right system range with an installer.
Battery and inverter direction
Practical guidance on storage expectations and the class of inverter suited to the estimate.
Key assumptions used
The report explains the energy assumptions and planning basis behind the estimate.
Practical next steps
Use the report for installation planning, budgeting, or early vendor conversations.
Report Preview
Preview the planning report before payment
Read the estimate summary now, then unlock the detailed planning sections once you are ready to proceed.
Preview first, unlock after payment
Estimate summary visible now
Available in full report
Estimated system size
Sizing not ready
Panel sizing loading...
Solar array direction
Battery sizing loading...
Storage recommendation
Inverter sizing loading...
Recommended system class
Complete Stage 0 to start the live estimate and generate your first basic sizing report.
Secure payment via IntaSend
Your checkout is processed through IntaSend’s secure payment flow.
M-Pesa supported
Use the payment route you prefer, including M-Pesa where available.
Based on your submitted inputs
This report is generated from the profile, usage, and roof context you already provided.
Need help before paying?
+254 771 649 391
Basic Solar Report
One-time fee
KSh 450
Unlock your full personalized solar sizing report with system recommendations, planning assumptions, and practical next-step guidance.
Generate the report and payment reference first. Secure checkout follows without leaving your report flow.
The estimate stays synced to your current Stage 0 draft. If you update the site profile later, generate the report again to refresh the snapshot and payment reference.
Ideal for early qualification when you only have site, usage, and roof information.
The basic report still goes through OTP verification, payment reference, and PDF release.
Move to Advanced when the appliance schedule or surge demand needs to be explicit.
